KYMCO Dink 50 User Manual

1. GENERAL INFORMATION
1-40
DINK 50/125
CLUTCH, DRIVE AND DRIVEN PULLEYS
cWorn or slipping drive belt
dBroken ramp plate
eBroken drive face spring
fSeparated clutch lining
gDamaged driven pulley shaft splines
hDamaged final gear
iSeized final gear
cBroken shoe spring
dClutch outer and clutch weight stuck
eSeized pivot
cWorn or slipping drive belt
dWorn weight rollers
eSeized drive pulley bearings
fWeak driven face spring
gWorn or seized driven pulley bearings
cWorn or slipping drive belt
dWorn weight rollers
eWorn or seized driven pulley bearings
cOil or grease fouled drive belt
dWorn drive belt
eWeak driven face spring
fWorn or seized driven pulley bearings
Engine starts but motor-
cycle does not move
Engine lacks power a
t
start of a grade(poor
slo
p
e
p
erformance
)
Symptom
Probable Cause
Engine lacks power a
t
high speed
There is abnormal noise
or smell while running
Motorcycle creeps o
r
engine starts but soon
stops or seems to rush
out (Rear wheel rotates
when en
g
ine idles
)

KYMCO Dink 50 Specifications

General

Brand	KYMCO
Model	Dink 50
Category	Scooter
Language	English