KYMCO Dink 50 User Manual

15. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
15-3
DINK 50/125
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• When performing the services stated in this section, the engine and exhaust muffler must be cold
to avoid scalding.
• During servicing, keep oil or grease off the brake pads and brake disk.
SPECIFICATIONS
Dink 125 Unit: mm (in)
Ite
m
Standar
d
Service Limit
Rear wheel rim runout
⎯
2
(
0.08
)
Rear brake disk thickness 3.5～3.8
(
0.14～0.152
)
3
(
0.12
)
Rear brake disk runout
⎯
0.3
(
0.012
)
Rear brake master c
y
linder I.D. 12.7～12.74
(
0.508～0.5096
)
12.75
(
0.51
)
Rear brake master c
y
linder
p
iston O.D. 12.65～12.68
(
0.506～0.5072
)
12.64
(
0.5056
)
Rear brake cali
p
er c
y
linder I.D. 25.4～25.45
(
1.016～1.0144
)
25.45
(
1.018
)
Rear brake cali
p
er
p
iston O.D. 25.33～25.36
(
1.0132～1.0144
)
25.3
(
1.012
)
Dink 50 Unit: mm (in)
Ite
m
Standar
d
Service Limit
Rear wheel rim runout
⎯
2
(
0.08
)
Rear brake drum I.D. 110
(
4.4
)
111
(
4.44
)
Rear brake linin
g
thickness 4.0
(
0.16
)
2.0
(
0.08
)
Rear shock absorber s
p
rin
g
free len
g
h. 209
(
8.36
)
⎯
TORQUE VALUES
Dink 125
Rear axle nut 120 N•m (12 kgf•m, 86 lbf•ft)
Rear shock absorber lower mount bolt 27 N•m (2.7 kgf•m, 19 lbf•ft)
Rear shock absorber upper mount bolt 40 N•m (4 kgf•m, 29 lbf•ft)
Rear fork mount bolt 27 N•m (2.7 kgf•m, 19 lbf•ft)
Master cylinder reservoir cover screw 2 N•m (0.2 kgf•m, 1.4 lbf•ft)
Master cylinder holder bolt 12 N•m (1.2 kgf•m, 9 lbf•ft)
Brake lever pivot bolt 2 N•m (0.2 kgf•m, 1.4 lbf•ft)
Brake lever pivot nut 10 N•m (1 kgf•m, 7.2 lbf•ft)
Brake light switch screw 1 N•m (0.1 kgf•m, 0.7 lbf•ft)
Brake caliper mounting bolt 32 N•m (3.2 kgf•m, 23 lbf•ft)
ALOC bolt: replace with a new one.
Brake caliper bleed screw 6 N•m (0.6 kgf•m, 4.3 lbf•ft)
Brake pad pin 18 N•m (1.8 kgf•m, 13 lbf•ft)
Brake hose oil bolt 35 N•m (3.5 kgf•m, 25 lbf•ft)

KYMCO Dink 50 Specifications

General

Brand	KYMCO
Model	Dink 50
Category	Scooter
Language	English