8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
8-9
DINK 50/125
Inspect the kick starter spindle and starter
driven gear forcing parts for wear or damage.
ASSEMBLY
Apply grease to the spindle gear shaft.
Install the kick starter spindle bushings into
the left crankcase cover.
Install return spring and spindle gear into the
left crankcase cover.
Apply grease to the driven gear shaft.
Install the washer onto the left crankcase
cover.
Install the starter driven gear and friction
spring as the figure shown.
Starter Driven Gear Shaft Forcin
Return Spring
Kick Starter Spindle
Plastic Bushing
Bushing
When installing the return spring, use a
screw driver to press the inward and
outward return spring hooks into their
original positions respectively.
＊
Friction Spring
Starter Driven Gea
To Next Page
Loading...
Need help?
General
