14.HANDLEBAR/FRONT WHEEL/FRONT BRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
14-7
DINK 50/125
ASSEMBLY
Install the left handlebar switch.
Install and tighten the two screws securely.
Install the right handlebar switch.
Lubricate the throttle grip front end with
grease and then connect the throttle cable to
the throttle grip.
Install and tighten the two screws.
Align the pin on the left handlebar switch
with the hole on the handlebar.
＊
Align the pin on the right handleba
To Next Page
Loading...
Need help?
General
