11. CRANKCASE/CRANKSHAFT
11-6
DINK 50/ 125
Measure the crankshaft runout.
Service Limit: 0.1 mm (0.004 in)
Measure the crankshaft bearing play.
Service Limits:
Axial : 0.2 mm (0.008 in)
Radial: 0.05 mm (0.002 in)
CRANKCASE ASSEMBLY
Clean off all gasket material from the
crankcase mating surfaces.
Install a new oil seal into the left crankcase.
Axial
Play
Play
Radial
Oil Seal
Left Crankcase
Avoid damaging the crankcase mating
surfaces.
＊
To Next Page
Loading...
Need help?
General
