Lenze I51AE175B User Manual

Parameter Name / value range / [default seng] Info
0x6073
(P324.00)
Max current
(Max current)
0.0 ... [200.0] ... 3000.0 %
Maximum overload current of the inverter.
•
100 % ≡ Motor rated current 0x6075 (P323.00)
•
If the current consumpon of the motor exceeds this current limit,
the inverter changes its dynamic behaviour, in order to counteract this
exceedance.
•
If the change in the dynamic behaviour carried out by the inverter
does not result in exing the overcurrent state, the inverter outputs
an error.
Note!
This parameter is not idencal to the so-called ulmate motor current
I
ULT
!
•
The ulmate motor current set in 0x2D46:001 (P353.01) is a limit
value for synchronous motors that serves to protect their magnets.
•
The value to be set here should always be considerably below the ul-
mate motor current!
0x2D88
(P104.00)
Motor current
(Motor current)
•
Read only: x.x A
Display des present current-r.m.s. value.
0x6078
(P103.00)
Current actual value
(Current actual)
•
Read only: x.x %
Display of the present motor current.
•
100 % ≡ Motor rated current 0x6075 (P323.00)
Motor control
Motor protecon
Current limits
167

Lenze I51AE175B Specifications

General

Brand	Lenze
Model	I51AE175B
Category	Inverter
Language	English