10-24 Patient Data Management
Parameter Description Remark
Lockout
Duration
Set the duration after an account is locked.
password for 5 times
within 60 minutes, the
account is locked, and
the user can log in to
the system only after
60 minutes. Other
users with unlocked
accounts can still log in
to the system normally.
R
lockout
Reset all locked accounts. /
Enable
strong
password
Enable strong password to improve security.
If the strong password is enabled and you
log in to the system with the account that is
added before the strong password is
enabled, the system prompts a warning
message to inform you whether your
password conforms to the password policy.
The administrator can change password for
administrator or operator via [Setup] → [Access
Control].
If the strong password is enabled and you
add a new user account, the system prompt
an error message to inform you that the
password is too weak:
Please modify the password according to the
error message.
/
Setting automatic machine locking time
Turn on the access control function and log in to the system as Administrator before you set the
automatic maching locking time. Deselect [ScreenSaver] or [Standby] via [Setup]-> [System]->
[General].
1. Open the “Access Control” page using the path: [Setup] → [System] → [Access Control].
To Next Page
Loading...
Need help?
General
