Mindray DC-90 User Manual

Setup 12-5
Type Item Description
Screen
Saver
Screen Saver
Select the different saver methods to the system.
After enabling the screen saver, check “Mindray” to
select the image from the system. Or click [Browse] to
select the image on your own. Click [Preview] to
preview the screen saver image.
To set the waiting time before the system enters
dormancy status in the drop-down list beside “Wait”.
The system enters screen saver automatically if the
system waiting time exceeds the screen saver already
set.
The system enters screen saver automatically if the
system waiting time exceeds the screen saver already
set and standby time.
12.1.3 Image Preset
Open the page via [Setup] → [System] → [Image].
Type Item Description
Reset Config Probe
To set the default probe model for the system from the
drop-down list.
The default parameters are applied to the new probe if
checking Use the default setting when start a new
exam.
Image size /
Set the standard for saving the image or using the
digital/graph printer.
Default Elasto / To set the default elasto imaging mode for the system.

Mindray DC-90 Specifications

General

Brand	Mindray
Model	DC-90
Category	Diagnostic Equipment
Language	English