13-8 Probes and Biopsy
Model Length(mm) Width(mm) Height(mm) Cable Length(mm)
L12-3E 102 61 24 1950±50
P7-3E 102 38 30 1950±50
SP5-1E 102 38 30
2200±50
L9-3E 101 58 23 1950±50
V11-3HE 320 38 33 1950±50
SC6-1E 109.5 76.7 28 1950±50
SD8-1E 120 77.6 53 2260±50
L14-5WE 98 66.4 25.5 1950±50
L20-5E 98 43 24.1 1950±50
SC5-1NE 109.5 76.7 28 1950±50
The above is a dimension illustration of the V11-3Ws probe.
You can select the probe sheath according to the actual application situation.
13.1.5 Probes Cleaning, Disinfection and Sterilization
Before and after completing each examination, clean and disinfect (or sterilize) the probes as
required. When biopsy procedures have been performed, be sure to sterilize the needle-guided
bracket. Fail to do so may result in the probe and the needle-guided bracket to becoming sources
of infection. Please follow the instructions in the manual for cleaning.
WARNING:
Never immerse the probe connector into liquid such as water or
disinfectant. Immersion may cause electrical shock or malfunction.
To Next Page
Loading...
Need help?
General
