4 - 44
4.4 Universal Model QCPU
4.4.4 Latch Clear Operation
4
HARDWARE SPECIFICATIONS OF THE CPU MODULE
POINT
Operate the RUN/STOP/RESET switch with your fingertips.
Do not use any tool such as a screwdriver because the switch part might be
damaged.
4.4.4 Latch Clear Operation
For the Universal model QCPU, latch clear is performed by the remote latch clear
operation of GX Developer.
Latch clear cannot be executed by operating the switches of the CPU module.
POINT
1. The valid/invalid for latch clear in the clear range of latch clear operation can
be set for each device. The setting can be mode in the device setting of the
PLC parameter.
2. For the remote latch clear operation by GX Developer, refer to the manual
below.
QCPU User's Manual (Functional Description, Program Fundamentals)
To Next Page
Loading...
Need help?
General
