Mitsubishi Q01CPU User Manual

5
POWER SUPPLY MODULE
5.2 Specifications
5.2.2 Selecting the power supply module
5 - 21
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
GENERAL SPECIFICATIONS
4
HARDWARE SPECIFICATIONS OF THE CPU MODULE
5
POWER SUPPLY MODULE
6
BASE UNIT AND EXTENSION CABLE
7
MEMORY CARD AND BATTERY
8
CPU MODULE START- UP PROCEDURES
• Because 5VDC is supplied to Q5 B through an extension cable, voltage is
lowered in the extension cable.
The power supply module and extension cable must be selected so that a
voltage of 4.75VDC or more is supplied at the "IN" connector of Q5 B.
For details of the voltage drop, refer to Section 6.1.4.
(b) Methods for reducing voltage drops
The following methods are effective to reduce voltage drops at the extension
cables.
1) Changing the module loading positions
Load large current consumption modules on the main base unit.
Load small current consumption modules on the extension base unit (Q5 B).
2) Using short extension cables
The shorter the extension cable is, the smaller the resistance and voltage
drops are.
Use the shortest possible extension cables.
(2) When the base unit is Q3 SB:
Keep the current consumption of the slim type main base unit (Q3 SB) not
exceeding the 5VDC rated output current of the slim type power supply module
(Q61SP).
Table5.14 5VD rated output current
5VDC rated output current Type
6.0A Q61P-A1, Q61P-A2, Q61P, Q63P
8.5A Q64P, Q64PN
Diagram 5.2 Modules and peripheral device that are powered
by power supply module
Table5.15 5VD rated output current
5VDC Rated output current Type
2.0A Q61SP
CPU module
Q02(H)CPU,
Q06HCPU, etc.
Peripheral devices, converter,
cables, etc. (for connection
between CPU module and
PC)
Slim type
Power supply module
Q61SP
I/O module QX10,
QY10, etc.
Intelligent function module Q64AD,
QJ71LP21-25, etc.
Slim type main base unit Q32SB,
Q33SB, Q35SB

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English