Mitsubishi Q2ACPU User Manual

App - 45
APPENDICES
* The AJ71QC24N can be used with QnA link instructions designated for use with special
function modules (G(P). ***).
AJ71ID -R4 control
instruction
ID controller initial setting IDINIT1, IDINIT2
Data read from ID data carrier IDRD1, IDRD2
Data write to ID data carrier IDWD1, IDWD2
Continuous read from ID data carrier IDARD1, IDARD2
Continuous write to ID data carrier IDAWD1, IDAWD2
Data compare with ID data carrier IDCMP1, IDCMP2
Same data batch write to ID data carrier IDFILL1, IDFILL2
Copy between ID data carriers IDCOPY1, IDCOPY2
ID data carrier clear IDCLR1, IDCLR2
ID data carrier use end IDOFF1, IDOFF2
ID data carrier use start IDON1, IDON2
AJ71QC24 control instruction
*
Writes the user registration frame to the
E
2
PROM for the AJ71QC24N.
PUTE
Reads the user registration frame from the
E
2
PROM for the AJ71QC24N.
GETE
Data send with the dedicated protocol using
the "on demand" function
ONDEMAND
Data send for the specified number of bytes in
no-protocol mode
OUTPUT
Data send in accordance with the send
schedule table in no-protocol mode
PRR
Data receive in no-protocol mode INPUT
Data send with the bi-directional protocol BIDOUT
Data receive with the bi-directional protocol BIDIN
Communication status read SPBUSY
Device read from other stations READ
Device write to other stations SWRITE
Data send to other stations SEND
Data receive from other stations RECV
Transient transmission request to other
stations
REQ
Classification Function Instruction Symbol

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English