Chapter 4 Setting Up the Microscope
4.2 Setup Procedure
2-29
4.2 Setup Procedure
4.2.1 Assembling Each Part and Attaching Them to the Microscope
Perform the steps below to assemble each part and attach them to the microscope.
1
TIRF-PAU illuminator installation ⇒ Page 2-30
2
Attach the dichroic mirrors (photo activation illuminator unit only). ⇒ Page 2-31
3
Attach the field diaphragm unit. ⇒ Page 2-32
4
Attach the epi-fl filter turret. ⇒ Page 2-32
5
Assemble the remaining microscope parts. ⇒ Page 2-33
6
Attach the laser safety cover (TIRF illuminator unit only). ⇒ Page 2-33
7
Attach the light shielding plate. ⇒ Page 2-33
8
Attach the filter cubes. ⇒ Page 2-34
9
Attach the camera. ⇒ Page 2-34
10
Affix the labels. ⇒ Page 2-35
To Next Page
Loading...
Need help?
General