1-71
Setting Up the Microscope
4
4.1 List of Parts
The parts below have been added to the basic set of the Ti-E, Ti-E/B, Ti-U, and Ti-U/B.
The procedures for attaching sub-units and parts required for installing the TIRF-PAU illuminator are
described later in this section.
TIRF illuminator unit or motorized TIRF illuminator unit
Table 4.1-1
Unit Name of equipment Model Remarks
Ti-E
Ti-E/B
Ti-U
Ti
Ti-U/B
Use with the TI-DH dia-illuminator
100W.
Apo TIRF 60xH/1.49
Apo TIRF 100xH/1.49
Plan Apo TIRF 60xH/1.45
Plan Apo TIRF 100xH/1.45
Plan Apo VC 60xH/1.4
Objectives for TIRF
Plan Apo VC 100xH/1.4
Select the appropriate objective
for observation.
TI-LUSU
Shutter Unit
TI-LU4SU
PC compatible
AD-1260B
AC adapter
EA1050E-120
For TI-LUSU shutter unit
TI-FLC
TI-FLC-E
Epi-fl filter turret for
epi-fl illumination
TI-FLC-E/HQ
Three exclusive high-precision
filter cubes are supplied with the
TI-FLC-E/HQ as accessories.
Fiber optic light source
Episcopic light source
Lamphouse + power supply
Make sure to read the instruction
manuals for the product.
26
Stage ring
32
32 is made of glass.
Stage up kit TI-BSUK70
Microscope and
accessories
Back port unit TI-BPU
TI-BSUK70 70 mm stage up kit is
required.
TI-TIRF
TIRF illuminator unit
TI-TIRF-E
TIRF100 and TIRF60 - EPI40 are
interchangeable.
Fiber C1 single mode fiber
Straight fiber can be used
combined with the straight fiber
adapter.
Straight fiber adapter TIRF2 S
When connecting an optical fiber
that has a straight tip, install a
straight fiber adapter to the
attachment.
TIRF/
motorized TIRF
illuminator unit
Stage up lens
TI-TIRF
Stage up lens
When using the TIRF/motorized
TIRF illuminator unit on the lowest
step during stageup, install the
stage up lens to the
TIRF/motorized TIRF illuminator
unit. The TI-BSUK70 70 mm stage
up kit is required to stageup.