Chapter 1 System Configurations and Part Names
1.3 Safety Labels and Openings
1-34
1.3.10 TI-LU4SU Shutter Unit LU4
For the TIRF illuminator unit or the motorized TIRF illuminator unit
When used with four-laser module A
Make sure that the label is affixed in place.
(4) Safety standard label
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Cet appareil numérique de la classe A est confirme
à la norme NMB-003 du Canada.
This Class A digital apparatus complies with Canadian
ICES-003.
MADE IN JAPAN
POWER
TI-LU4SU
EMISSION
LASER
This device complies w ith Part 15 of the FCC Ru les.
Operation is subject to the following tw o
conditions:
(1) this dev ice may not cause harmful interference,
and
(2) this dev ice must accept any interference received,
including interference that may cause u ndesired
operation.
Cet appareil numérique de la classe A est confirme
à la norme NMB-003 du Canada.
This Class A digital apparatus complies w ith Canadian
ICES-003.
MADE IN JAPAN
Figure 1.3-11
(Bottom view)
(Top view)
(4)
To Next Page
Loading...
Need help?
General