1
Introduction
This setup manual is written for service personnel who is installing the Nikon TIRF Illuminator Unit,
Motorized TIRF Illuminator Unit, Photo Activation Illuminator Unit, TIRF-PAU Illuminator, and Beamsplitter
50/50 for Ti Series Inverted Microscopes.
To ensure correct installation, read this manual carefully before installing the product.
• No part of this manual may be reproduced or transmitted in any form without prior written permission from
Nikon.
• The contents of this manual are subject to change without notice.
• This manual contains confidential information. Do not disclose this manual to a third party other than the
authorized Nikon personnel.
• Although every effort has been made to ensure the accuracy of this manual, errors or inconsistencies may
remain. If you note any points that are unclear or incorrect, please contact a Nikon Service Department.
• Some of the equipment described in this manual may not be included in the set you are installing.
• If you intend to use any other equipment with this product, read the manual for that equipment too.
• If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
To Next Page
Loading...
Need help?
General