Electrical System 111Service Manual – CS7000
Harness to Harness Connector Locations
Most connectors are plugged into a component like the squeegee actuator; nd the squeegee actuator and
you can locate the squeegee actuator electrical connector. However, there are a few connectors that connect
two harness. These are pictured here.
• Main Harness X1 and X2 to Hopper Harness X262 and X263
• Main Harness X274 to Engine Interface Harness X175
• Main Harness X166 to Taillight Harness X239
Underneath
• Engine Interface Harness X265 and X266 to Engine Harness (Photo of diesel engine)
Below
To Next Page
Loading...
Need help?
General
