To Next Page

To Previous Page

Solution System 326Service Manual – CS7000

Solution Solenoid Valve

The Solution Solenoid Valve is located

on the top center of the scrub deck and

supplies the solution to the Solution

Manifold

. The Solution Manifold connects to

the three Hoses going to the three scrub

brushes. Note that the adjacent drawing

is a top view looking down onto the scrub

deck.

Note that the Solution Solenoid Valve is

designed to be easy to remove and install.

It is possible for dirt or debris to interfere

with the Solution Solenoid Valve seat and

prevent the seat from sealing. This can

prevent the Solution Solenoid Valve from

shutting off the solution ow completely

and requires that the Solution Solenoid

Valve

be cleaned or replaced.

Solution Nozzles

The Solution Nozzles are part of the deck

weldment and direct the solution onto the

brushes. (The right-hand scrub motor has

been loosened and moved slightly in order

to show the Solution Nozzle.)

Solution

Solenoid

Valve

Hose

(typical)

Solution

Manifold

Left-hand

Scrub

Motor

Solution

Nozzle

(typical)

Nilfisk-Advance CS7000 Service Manual

Other manuals for Nilfisk-Advance CS7000