Nilfisk-Advance CS7000 Service Manual

Recovery System 293Service Manual – CS7000
Maintenance and Adjustments
Warning! Before performing any machine maintenance or adjustments, make sure the key
switch is off, the key is removed from the machine and the parking brake is engaged.
To Clean the Vacuum Filter and Filter Screen
1. Rotate the two Latches 90 degrees and
remove the Vacuum Filter Lid Assembly.
2. Remove and clean the Filter and Filter
Screen
with a vacuum, or by washing
them in warm water.
3. When the Filter and Filter Screen are
clean and dry, reinstall them into the
recovery tank.
Service Note: The Filter and
Filter Screen must be completely
dry before reinstalling.
4. Rotate the two Latches back 90
degrees to secure the Vacuum Filter Lid
Assembly
.
Latch (2)
Vacuum
Filter Lid
Assembly
Filter
Filter
Screen

Nilfisk-Advance CS7000 Specifications

General

Brand	Nilfisk-Advance
Model	CS7000
Category	Floor Machine
Language	English