General Information 44Service Manual – CS7000
Steering Wheel
The steering system in the CS7000
is a “steer by wire” system that
uses an encoder and brushless
AC three-phase motor to transfer
steering wheel input to the drive
wheel.
Note that when the machine key
switch is off, the Steering Wheel
will “freewheel” with no turning
resistance. Once the machine is
powered-up, normal steering feel
is restored.
The standard Tilt Lever allows the
Steering Wheel to be tilted up and
down to suit the Operator.
The Circuit Breakers are mounted
on the panel adjacent to the
Operator position.
Foot Pedals
The Brake Pedal/Parking Brake
brakes the machine, and locks in
the applied position when used as
a parking brake.
The Drive Pedal moves the
machine forward and backward.
Machine direction and speed are
proportional to the Drive Pedal
position.
Circuit
Breakers
Tilt
Lever
Steering
Wheel
Brake Pedal/
Parking Brake
Drive
Pedal
To Next Page
Loading...
Need help?
General
