EasyManuals Logo
Home>Nilfisk-Advance>Floor Machine>CS7000

Nilfisk-Advance CS7000 Service Manual

Nilfisk-Advance CS7000
440 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #216 background imageLoading...
Page #216 background image
Engine System - Petrol (Gasoline) 216Service Manual – Haram Captor II
Inspect Air Filter
Check the service indicator mounted on the air cleaner elbow. If the red disc is visible in the “window”, the
lters should be cleaned or replaced.
Replace Air Filters
1. Release the latches and remove the air lter housing cover.
2. Remove the outer lter element.
3. Blow out air cleaner housing with compressed air with inner lter element still in place to prevent dirt
from entering the engine air intake.
4. Remove the inner lter element.
5. Clean residual dust from the inside of the air cleaner housing, taking care to prevent any dirt or debris
from entering the air intake.
6. Install a new inner lter element and then the new outer lter element making sure that they seal well
at their ends.
7. Install the air cleaner housing cover.
Clear Window = Okay
Red in Window = Restricted Filters

Table of Contents

Other manuals for Nilfisk-Advance CS7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance CS7000 and is the answer not in the manual?

Nilfisk-Advance CS7000 Specifications

General IconGeneral
BrandNilfisk-Advance
ModelCS7000
CategoryFloor Machine
LanguageEnglish

Related product manuals