Poly Studio X30 Administrator's Guide

● Go to the Poly Lens Feedback Portal (for Studio X70, Studio X52, and Studio E70 only), and fill
out the questionnaire.
1. Log in to the system web interface.
2. Go to Audio / Video > Video Inputs > Poly Studio E70.
3. From the Tracking Mode drop-down menu, select People Framing (Preview).
Configure Camera Tracking Settings for G7500
With a G7500 system, Poly camera tracking technology can automatically frame groups of people or
the active speaker in medium and large rooms.
Tracking options and behavior depend on your connected camera. For example, if you use a
standalone EagleEye IV camera with your system, you won’t see tracking options.
1. In the system web interface, go to Audio/Video > Video Inputs.
2. Go to the camera’s settings and specify a Tracking Mode.
● Frame Group: The camera automatically locates and frames all the people in the room.
● Frame Speaker: The camera automatically locates and frames the active speaker. When
someone else starts speaking, the camera switches to that person.
NOTE: When you mute your microphone, the camera tracking mode automatically switches
to Frame Group.
● People Framing (Preview): The camera tracks up to six individuals placing them in individual
frames. If the camera detects more than six people, the camera places all participants in a
single frame.
People framing is supported on Studio X70 and Studio E70.
NOTE: People framing is a preview feature. Preview features are fully tested and
supported features that Poly continues to develop in alignment with customer feedback.To
provide feedback, use one of the following options:
● In Poly Lens Desktop (v 1.1.18 or later), select Feedback.
● Go to the Poly Lens Feedback Portal (for Poly Studio X70 and Studio E70 only), and fill
out the questionnaire.
● Off: Disables automatic tracking. You must control the camera manually.
3. Set Tracking Enabled to On or Off.
Setting the Tracking Enabled toggle to On or Off also sets the Camera Tracking toggle to On or
Off on a paired TC8 or TC10 controller.
4. Turn on the Picture in Picture setting.
This setting is available only with the EagleEye Director II camera. When enabled, a picture-in-
picture window displays showing a wide angle of the room in addition to the main window
showing the primary speaker(s).
5. Select Save.
96
Chapter 9Configuring Video and Camera Settings

Poly Studio X30 Specifications

General

Brand	Poly
Model	Studio X30
Category	Conference System
Language	English