2. Choose from:
● TV Speakers - Sound is sent to through HDMI out to the TV speakers. The 3.5 mm audio
output is turned off.
● Line Out - Sound is sent through the 3.5 mm audio output. Sound is turned off for the HDMI
output.
● TV Speakers and Line Out - Sound is output to the HDMI output and the 3.5 mm audio
output.
Changes take effect immediately.
Configure Audio Output Settings on Studio X Systems
You can configure the audio output settings for your system.
1. In the system web interface, go to Audio/Video > Audio > Audio Output.
2. Configure the following settings (your changes save automatically):
Setting Description
Primary Audio Volume Sets the main audio output volume level going to the
speakers.
Bass Sets the volume level for low frequencies without
changing the primary audio volume.
Treble Sets the volume level for high frequencies without
changing the primary audio volume.
Speaker Options Specifies the speaker output.
● TV Speakers: Use only the speakers on your
connected monitors.
● System Speakers: Use only the built-in speakers on
a Studio X70, Studio X52, Studio X50, and Studio
X30 system.
Using Poly Trio Speakers
When you pair a Poly Trio system with your video system, you can use the phone’s speakers as the
audio output for the room.
Also note the following when using Poly Trio speakers with your video system:
● You can’t use a Poly Trio if your system is connected to Wi-Fi as the primary network.
● In Microsoft Teams Rooms mode:
– The Trio Teams Rooms controller offers limited functionality and isn't supported as a Teams
Rooms controller.
– Use a connected TC8/TC10 or touch screen monitor to control your Microsoft Teams Rooms
environment.
Choose Speakers When Paired with Poly Trio
In or out of a call, you can toggle whether you want to use Poly Trio, connected monitor, or video
system speakers.
Configure Audio Output Settings on Studio X Systems
81
To Next Page
Loading...
Need help?
General
