Poly Studio X70 Privacy Shutter Behavior
The privacy shutter automatically opens and closes depending on the state of the connected video
system.
Poly Studio X70 Privacy Shutter Behavior
NOTE: Shutter behavior may vary depending on the partner application.
System Event Shutter Behavior
The system powers on Shutters open
The system powers off Shutters close
NOTE: If you remove power immediately, the shutters don't
close.
The system enters sleep mode or digital signage starts and
the
Camera Sleep Setting is set to Save Energy
Shutters close
The system enters sleep mode or digital signage starts and
Camera Sleep Setting is set to Fast Wake
Shutters remain open
NOTE: When Fast Wake is set, the shutters never close.
You wake the system Shutters open
You wake the system and the Studio X70 built-in camera
isn’t the primary camera
Shutters remain closed
You select the Studio X70 built-in camera as the primary
camera
Shutters open
The system receives an incoming call If the shutters are closed, they remain closed until the call is
answered
The system is sending video Shutters are open
The system is in an active call and the video is muted Shutters are open
Poly Studio X52 Hardware
The following figure displays the hardware features on the Poly Studio X52 system. The table lists
each feature numbered in the figure.
Table 2-5
Poly Studio X52 Feature Descriptions
Ref. Number Feature Feature Description
1 Speaker Stereo audio output
2 Microphone array Microphone array that captures audio
Poly Studio X70 Privacy Shutter Behavior 9
To Next Page
Loading...
Need help?
General
