Poly Studio X30 Administrator's Guide

● State/Province
● Country
4. Select Save.
Set the Date and Time
Change the date and time settings in the G7500 and Studio X series system web interface.
1. In the system web interface, go to General Settings > Date and Time.
2. Configure the following settings (your changes save automatically):
Setting Description
Date Format Specifies how the date displays.
Time Format Specifies how the time displays.
Auto Adjust for Daylight Saving Time When enabled, the system clock automatically adjusts for
daylight saving time.
Time Zone Specifies the time difference between GMT and your
location.
Time Server Specifies if you want to automatically or manually
configure the system to use a time server. You can also
select Off to manually enter the date and time.
Primary Time Server Address
Specifies the address of the primary time server your
system uses when you set Time Server to Manual.
Secondary Time Server Address Specifies the address of the time server your system uses
when the Primary Time Server Address doesn’t respond.
This is an optional field.
Current Date and Current Time
If you set Time Server to Manual or Auto, the system
doesn’t display these settings.
If you set Time Server to Off, you can configure Current
Date and Current Time.
Set the System Location
Specify the country and country code where the VVX business IP phones system is located.
NOTE: To avoid power frequency issues with your system, choose a location.
1. In the system web interface, go to General Settings > My Information.
2. Go to Location.
3. Configure the following settings (your changes save automatically):
Setting
Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code associated
with your system.
Country Code
Displays the country code associated with the system location.
Set the Date and Time 39

Poly Studio X30 Specifications

General

Brand	Poly
Model	Studio X30
Category	Conference System
Language	English