EasyManuals Logo
Home>Poly>Conference System>Studio X30

Poly Studio X30 Administrator's Guide

Poly Studio X30
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Setting Description
Autorotation Specifies whether the system uses autorotation for Poly
microphones. If you enable this feature, the system
automatically assigns left and right channels for the
microphone based on the sound it senses from the left
and right speakers.
Configuring the Microphone Adapter
The video system automatically configures Poly Microphone IP Adapter when you pair it.
The Studio X70, Studio X52, Studio X50, and Studio X30 systems don’t support the microphone
adapter.
Note the following when using the microphone adapter:
You can’t use Poly IP table and ceiling microphones.
Polycom StereoSurround isn’t available.
The audio input level (mono channel meter) displays in the local interface and system web
interface.
Polycom Acoustic Fence technology isn't supported.
The RealPresence Group Series microphone array configuration uses stereo audio by default, but
the microphone adapter supports only mono mode.
Polycom Acoustic Fence
Polycom Acoustic Fence technology creates a virtual
audio fence
that blocks sounds from outside the
fence. It suppresses background noise during calls to enhance audio quality for call participants.
Polycom Acoustic Fence works in mono mode only and disables Polycom StereoSurround when
enabled.
Polycom Acoustic Fence technology provides the following:
Mutes sounds outside the fence when no one is speaking inside it
Lowers sounds outside the fence by 12 dB when someone is speaking inside it
Mutes speakers when someone leaves the fenced area
Enables you to adjust the width of the audio fence
beam
to define the area where sounds are
picked up
For Studio X70, Studio X52, Studio X50, and Studio X30 Systems:
Once you enable Polycom Acoustic Fence on your Studio X70, Studio X52, Studio X50, and Studio
X30 system, you can also adjust the width of the audio fence beam so that the system’s built-in
microphones pick up sound in the area you want.
For G7500 Systems:
Once you enable Polycom Acoustic Fence, you must set up additional hardware to use this feature
with your G7500 system. You need a primary microphone and at least one more microphone to
create the fence.
Configuring the Microphone Adapter
75

Table of Contents

Other manuals for Poly Studio X30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Poly Studio X30 and is the answer not in the manual?

Poly Studio X30 Specifications

General IconGeneral
BrandPoly
ModelStudio X30
CategoryConference System
LanguageEnglish

Related product manuals