Error Skip. Determines whether printing stops or continues when a paper size or paper type mismatch
occurs.
• On. (Default) Printing stops when a printer size or printer type mismatch occurs.
• Off. The machine ignores a printer size or printer type mismatch and continues print.
I/O Time Out. Sets the length of time for the machine to wait for data from the USB port before it issues
an error.
Range: Off, 15 sec., 60 sec., 300 sec.
Copy Tab (M102/M103 Only)
Document Type. For the best copying results, select a setting for the content of the pages in the
documents.
• Text/Photo. (Default) Original pages contain both text and photos (or illustrations with large filled
areas).
• Text. Originals contains text only.
• Photo. Originals contain mostly photos or illustrations with little text.
Toner Save. Two settings are available.
• Off. Normal amount of toner is used for printing.
• On. Reduces the amount of toner used when printing. This setting extends the service life of the AIO
but prints appear slightly lighter. Use this setting for printing drafts, and then switch it off for final
prints.
Reduce/Enlarge. Selects a pre-set zoom rate for enlargement or reduction of copied images. Selecting
"Custom" enables the "Zoom" feature.
6. Troubleshooting
168
To Next Page
Loading...
Need help?
General