SP Mode Service Tables
SP Table Key
Notation What It Means
[range/default/step/units] Example: [-127 to +128/4.5/1/0.1 mm].
-127 to +128 Range
4.5 Default
1 Screen increments
0.1 mm Unit change for every screen increment.
Here is a summary of common terms and abbreviations used in the SP code descriptions.
Term What It Means
DFU Denotes “Design or Factory Use”. Do not change this
value.
DNA This Series (J027/J028/J029/
J035)
Does not Apply. Applies to a machine of another GELJET
series, not J027/J028/J029/J035.
DOM "Domestic" market only (Japan)
EUA Europe/Asia
EXP "Export" markets (North America, Europe, Asia)
FA "Factory Adjusted". The default setting is set at the factory
or service center.
FU Future Use. These SP codes appear but they are not
enabled at this time.
This Series Only Applies to the J027/J028/J029/J035 only.
LE Leading Edge
LE/TE Leading Edge/Trailing Edge
LEF Long Edge Feed (paper feeds sideways with the long
edge feeding first)
5. System Maintenance Reference
162
To Next Page
Loading...
Need help?
General