2. Appendix: SP Mode Tables
Service Mode, Engine Maintenance
There are two service modes for this machine:
• Service Mode. This mode is menu driven and includes important items for some adjustments as well
as other important functions such as displaying the firmware version number, clearing the memory,
printing reports, and so on.
• Engine Maintenance (SP) Mode. Consists of SP codes SP1-XXX to SP9-XXX. These are printer
engine SP adjustments, primarily but not exclusively used by designers for machine adjustments.
Service Mode
Entering/Exiting Service Mode
To enter Service Mode:
1. Enter the Service Mode.
2. [#Enter]> "Bit Switch"
• Bit Switch
• Reset Settings
• Service Summary
• Version Display
• Serial No. Edit
• Counter Setting
• Fax No. (Not Used)
• E. Saver Display
• Emergency Print
• Maintenance
• Wireless LAN
To Exit the Service Mode
1. Press [Escape]> "Service Menu".
2. [ /Menu] or [ ] > "End"> [#Enter]> Standby
-or-
29
To Next Page
Loading...
Need help?
General