Important Information
Make sure that the customers understand the following points about moving, storing, and using the
printer.
Checklist Before Moving the Printer
1. Turn the printer off. Disconnect the power cord.
• Never disconnect the power cord without first turning off the printer.
2.
To lift the printer, grip it at the center of each side by the hand recesses provided.
3. Never grip the duplex unit on the back of the printer.
4. Make sure the covers and trays are closed. Secure them with tape. Attach the tape at the same
area you removed at the time of installation (
Below).
5.
Disconnect the power cord. Tape the power cord to the back of the printer.
6. Remove all paper in the feed trays.
7. Do a test print to confirm that the printer operates correctly after you move it to another location. Do
the cleaning procedures with the printer driver, if necessary.
• To avoid ink spillage, always hold the printer level when you move it.
•
Work carefully to avoid dropping it or colliding with other objects in the work area.
Taping Positions during the Machine Transport
Taping: 11 positions
Cushion: 1 position
2. Installation
40
To Next Page
Loading...
Need help?
General