Ricoh IM C4510 User Manual

2. Copy
112
2
9. Press [Start].
Reserving a Copy Job While Executing Another Copy Job
When [Reserve] is displayed on the execution screen of the current copy job, you can
scan the original of another copy job to execute after the current job is completed (Job
Preset).
You can make reservations for up to eight jobs each in the Copier and Document Server
functions.
1. Press [Reserve] on the execution screen of a copy job.
2. Place a new original to scan on the machine.
page107”Basic Procedure for Copying Documents”
3. Specify 2 sided, Combine, Sort, and other copy settings if necessary.
page118”Duplex Copying”
page121”Combining and Copying a Multi-page Original onto a Single Sheet of Paper”
page127”Copying in Page Order or for Each Page Number”
4. Press [Reserve Start].
The machine starts scanning the placed original.
After the current copy job is completed, the reserved copy job starts automatically.
• To cancel the last reserved job or confirm the content of the current job, press [Job
Confirmation].
• You can confirm and cancel reserved contents on the [Check Status] screen. For
details, see the following section:
See "Deleting an Unnecessary Job from the Print Queue", User Guide (HTML).

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux