Ricoh IM C4510 User Manual

Basic Operation of the Machine
27
1
Names and Functions of the Control Panel
The touch panel (Smart Operation Panel) that displays the operation screen of the
machine is referred to as the "Control Panel".
• On both sides of the control panel, interfaces for connecting external devices and
slots to insert an USB flash memory device are provided.
• Even when the screen is turned off, the LED indicators on the frame of the control
panel show the status of the machine.
Touch Panel/Interface
1. Media slots
Insert an USB flash memory device. You can store the scanned data or print the file
stored on the media.
• Use the media formatted in FAT16 or FAT32.
• Certain types of USB flash memory devices cannot be used in the machine.
• USB extension cables, hubs, card readers, and USB flash memories with
encryption functions cannot be used.
• If the power of the machine is turned off or the media is removed from the
machine while the machine is reading the data in the media, check the data in
the media.
• Before removing the media from the slot, press the icon displayed on the screen
( ) to cancel the connection.

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux