Ricoh IM C4510 User Manual

1. Introduction and Basic Operations
20
1
• When the power is turned on, the screen may show that the machine is performing
an auto restart. Do not turn off the main power while the machine is processing. It
takes about 5 minutes until the machine restarts.
• If a file was deleted from memory, a Power Failure report is automatically printed as
soon as the power is restored. This report can be used to identify lost files.
See "Power Off Report", User Guide (HTML).
Turning Off the Main Power
• Do not turn off the power while the machine is in operation. To turn the power
off, confirm that the operation is finished.
• Do not hold down the main power switch while turning off the main power.
Doing so forcibly turns off the machine's power and may damage the internal
storage or memory and cause malfunctions.
• Do not press the main power switch repeatedly. When you turn the power on or
off, wait at least 10 seconds after confirming that the main power indicator on
the right side of the control panel has turned on or off.
1. Open the cover of the main power switch on the front right side of the machine, and
push the switch.
The main power indicator on the right side of the control panel turns off. The main
power turns off automatically after the machine has shut down properly.

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux