Ricoh IM C4510 User Manual

User Authentication
57
1
2. Press [User Name].
3. Enter the login user name, and then press [Done].
4. Press [Password].
5. Enter the login password, and then press [Done].
6. Press [Login].
• If an incorrect password is entered a specified number of times, login with the same
name is disabled (Lockout Function). The default setting for unsuccessful attempts
before a user is locked out is five. If the user is locked out, the administrator must
release the lockout.
See ”Specifying the Policy on Login/Logout”, User Guide (HTML).
• To log out from the machine, press [Logout] at the top right on the screen, and then
press [OK].
Logging In Using an IC Card
Hold an IC card over the IC card reader to the right of the control panel. If the card is not
registered on the machine, enter the authentication information and register the card.
1. Hold an IC card over the IC card reader.
• When the card is registered on the machine, login operation finishes.
• When the card is not registered, the registration screen is displayed. Proceed to
the next step to register the card.

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux