Ricoh IM C4510 User Manual

Basic Copying
125
2
To change the envelope weight, press [ChngThickness] to specify the weight.
5. Check that the selected envelope size is correct, and then press [OK].
• If the selected envelope size is not the same as the actual size, select the
correct envelope size.
• When you select [Custom Size], enter the envelope size. When the envelope is
set with the flap opened, be sure to include the width of the flap.
6. Press [OK].
7. Place the original on the exposure glass.
page296”Envelope Orientation and Recommended Status”
8. Press [Start].
Copying onto Envelopes in the Paper Tray
• The Duplex Copy function cannot be used for envelopes. If Duplex Copy is
specified, press one of the following keys to cancel the setting.
1. Set the envelopes in the paper tray.
page296”Envelope Orientation and Recommended Status”
You can load envelopes into Trays 2–4.
page285”Recommended Paper Sizes and Types”

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux