Ricoh IM C4510 User Manual

10. Driver Installation Guide
424
10
When "Generic PostScript Printer" is displayed even though the IP
address is correct
Check the network connection of the machine and the computer, and then
register again.
• When the machine is connected to a wired LAN.
Check that the cable is connected to the machine correctly.
5. Click [Add].
The progress screen is displayed.
• If the progress screen does not close after a while, click [Configure...] and
configure the option configuration of the printer. For the procedure of the option
configuration, see page424”Specifying the Option Configuration of the Machine
to the Printer Driver (Network Connection)”.
6. Check that the machine name is added to the [Printers & Scanners] screen.
7. Close the system preferences screen.
Specifying the Option Configuration of the Machine to the Printer Driver
(Network Connection)
If the option configuration of the machine is not automatically reflected, select the
option installed on the machine in [Printers & Scanners].

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux