Ricoh IM C4510 User Manual

When Messages Appear
281
8
Message
Cause
Solution and reference
"Exceeded time
limit for LDAP
server search.
Check the server
status."
The network is
busy.
Try again.
The setting
information is
incorrect.
Check the setting information of [Settings]
[System Settings] [Settings for
Administrator]
[Authentication/Charge]
[Administrator Authentication/User
Authentication/App Auth.]
[Register/Change/Delete LDAP Server].
See "Registering the LDAP Server", User
Guide (HTML).
"LDAP server
authentication has
failed. Check the
settings."
The user name or
password is
incorrect.
Select the user in the address book, press
[Edit], and specify the correct user name
and password in [User Management /
Other] tab [User Management]
[LDAP Authentication Info].
See "Registering a User in the Address
Book and Specifying the Login
Information", User Guide (HTML).
Messages that Appear When There Is a Problem with the Certificate
Message
Cause
Solution and reference
"The destination
cannot be selected
because the device
certificate used for
the S/MIME
signature is not
currently valid.
Please check the
certificate."
*1
The device
certificate used for
the S/MIME
signature is not
currently valid.
Install a new device certificate used for
the S/MIME signature.
See ”Encrypting Network
Communication”, User Guide (HTML).

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux