Ricoh IM C4510 User Manual

When Messages Appear
283
8
Message
Cause
Solution and reference
"The group
destination cannot
be selected
because it contains
a destination with
an encryption
certificate that is
not currently valid.
Please check the
certificate."
"Transmission
cannot be
performed because
the encryption
certificate is not
currently valid.
Please check the
certificate."
*1 Other operations may be included in "The destination cannot be selected" or
"Signature cannot be set".
Messages that Appear When an Application Site Cannot Be Used
Message
Cause
Solution and reference
"A server error has
occurred."
An unexpected
error has occurred
on the server.
• See the server maintenance
information in [Information].
• Check whether the
Network/Interface ([DNS
Configuration], [Control Panel: Proxy
Settings]) are correctly configured.
See "Network/Interface", User Guide
(HTML).
"Cannot connect to
server which
installs
applications. Check
maintenance
information on
Information screen
or network settings.
After checking,
please try again."
Cannot connect to
the installation
server.
"Could not update
the firmware."

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux