Ricoh IM C4510 User Manual

1. Introduction and Basic Operations
22
1
• When paper is jammed (The machine enters Fusing Unit Off mode except when
the cover is open.)
• When the Data In indicator is lit or flashing (The machine enters Fusing Unit Off
mode except when the Data In indicator is lit or flashing due to receiving faxes
or storing documents.)
• The machine does not enter Sleep mode in the following cases:
• During communication with external equipment
• When the internal storage is active
• When the service call message appears
• When the ADF, machine's cover, or ADF cover are opened
• When the "Add Toner" message appears
• When toner is being replenished
• When one of the following screens is displayed:
• System Settings
• Counter
• Inquiry
• Address Book
• Tray/Paper Settings
• When data is being processed
• If a file is waiting to be transmitted within the next minute using the "Send Later"
facsimile function
• When a recipient is being registered in the address list or group dial list
• When the sample print, locked print, hold print, or stored print screen is displayed
• When the screen of a document that was stored under the printer function appears
• When the internal cooling fan is active
• When accessing the machine using Web Image Monitor
Guide to Names and Functions of Components
• Do not obstruct the machine's vents. Doing so can result in fire as the internal
components are overheated.

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux