Ricoh IM C4510 User Manual

8. Troubleshooting
234
8
message. Change the setting when you are not using the IP-Fax or Internet Fax
function.
See "Changing the Parameter Settings", User Guide (HTML).
Messages that Appear When the Remote Fax Function Is Unavailable
For details about your network environment, consult the administrator.
When a message is displayed on the main-machine
Message
Condition
Solution and reference
"Check whether there
are any network
problems."
[16-00]
The machine is not
connected to the
network.
• Check that the machine is
connected to the network
correctly.
• Press [Confirm] to use the
G3 fax.
"Connection with the
remote machine has
failed. There is a
problem with the
remote machine
structure. Contact the
administrator."
Another main-machine
is registered in remote
machine.
Register the sub-machine in
[Settings] [System Settings]
[Machine] [Others]
[Register/Change/Delete
Remote Machine].
Another main-machine
is registered in remote
machine on the sub-
machine.
Register the machine in
[Settings] [System Settings]
[Machine] [Others]
[Register/Change/Delete
Remote Machine] on the sub-
machine.
"Transfer error has
occured. Check status
of remote machine."
A network error
occurred while
transferring the data.
• Check that the machine is
connected to the network
correctly.
• Check that the sub-
machine is connected to
the network and
functioning normally.

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux