Ricoh IM C4510 User Manual

Specifications for Paper
295
9
• When folding prints, toner in the folds will come off.
• If the prints are stored in the conditions described below, toner may melt:
• When a print and a half-dried print are put on top of each other
• When solvent-type adhesive agents are used for pasting prints
• When prints are placed on mats made of chlorinated plastic in locations of high
temperature for long periods of time
• When prints are placed in locations of extremely high temperatures, such as
near a heater
Thick Paper Orientation and Recommended Status
When loading thick paper of 106-300 g/m
2
(Approx. 28 lb. Bond–110 lb. Cover) in the
paper trays, or in the bypass tray, follow the recommendations below to prevent
misfeeds and loss of image quality.
Paper Orientation
Thick paper has a paper direction according to its grain. Set the paper direction
according to the grain, as shown in the following diagram:
Direction of
paper grain
Tray 1 or Tray
3 (LCT)
Tray 2–4
Large Capacity
Tray
Bypass Tray
Longitudinal
direction
Lateral
direction
Not
recommended
Not
recommended
Paper Storage
• Temperature: 20–25°C (68–77°F)
• Humidity: 30–65%.
Do not use together paper that has been stored in different environments.

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux