• "Original(s) left on exposure glass."
• "No paper."
page19”Turning On and Off the Power”
When a Message Appears While Using the Copy Function
"Cannot Detect
Original Size"
An original is not
placed correctly on
the machine.
Place the original correctly. When you
place an original on the exposure glass,
the machine detects the original size by
opening and closing the exposure glass
cover or ADF. Open the cover or ADF by
more than 30 degrees when placing an
original.
An original with a
difficult-to-detect
size even in the
regular size, such
as a transparency
or paper with sticky
notes, is placed on
the machine.
When scanning an original with a difficult-
to-detect size, specify the paper tray in
[Paper Select]. Also, when making an
enlarged or reduced copy, select an item
other than [Fit to Paper Size]
page303”Sizes Detectable with Auto
Paper Select”
An original of a
custom size is
placed on the
machine.
When scanning an original of a custom
size, specify the original size in [Original
Setting/Store File] [Original Size]
[Custom Size].
"2 Sided Copy is not
available with this
paper size."
(The name of some
other specified
finish, such as
"Rotate Sort", may
appear in "2 Sided
Copy".)
A paper size that is
not supported in
Duplex copying or
the specified
finishing type is
specified.
Check the paper size supported in Duplex
copying and the specified finishing type
and load the supported paper.
page308”List of Specifications”
To Next Page
Loading...
Need help?
General
