0906: Paper Alignment in 2nd Stacker Tray: With Feed
Adjust the alignment position of the Tip Stopper of the Second Stacker. It reduces variations in paper
alignment in the feeding direction due to paper size, thickness, curl, etc.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
01: A3 SEF
02: B4 JIS SEF
03: A4 LEF
04: A4 SEF
05: B5 JIS LEF
06: B5 JIS SEF
07: A5 LEF
08: A5 SEF
09: 11 × 17 SEF
10: 8
1
/
2
× 14 SEF
11: 8
1
/
2
× 11 LEF
12: 8
1
/
2
× 11 SEF
13: 5
1
/
2
× 8
1
/
2
LEF
14: 5
1
/
2
× 8
1
/
2
SEF
15: Other Paper Sizes
0 1 -1 0.1 mm
0907: Maximum Stack Quantity in Stacker Tray
Specify the maximum number of sheets that can be stacked on the stacker tray. If the unit detects that the
number of sheets reaches the set upper limit, a warning message will appear.
The maximum number of sheets you can set differs depending on the size, thickness, and paper curl. Set
the maximum number by specifying a ratio based on the number of sheets. Select [Large Size] when
using paper whose vertical and horizontal lengths are 210 mm or longer whose area is 8
1
/
2
× 11 or
wider. Select [Small Size] when using other size paper.
5. Adjustment Settings for Operators
224
To Next Page
Loading...
Need help?
General
