Removing Staple Waste
Select the message, and press [Replacement procedure]. Follow the procedure that is shown in the
animation to remove the waste staple.
• While "Waste Staple Receptacle is full. Empty the Waste Staple Receptacle." is displayed, you
cannot use the staple function.
• "Waste Staple Receptacle is full. Empty the Waste Staple Receptacle." is displayed until the staple
waste box is reinstalled.
• If the message is still displayed, reinstall the staple waste box.
6. Troubleshooting
254
To Next Page
Loading...
Need help?
General
