When Ejecting Thick Paper or Envelopes to the Upper Tray of the High
Capacity Stacker
Attach the supplied thick paper support tray when ejecting the following paper to the upper tray of the
high capacity stacker:
• Thick paper longer than the length of B4 JIS
• Envelopes that exceed 332 mm (13.1 inches) in length
Precautions Taking Booklets from the Trimmer
• When taking booklets from the trimmer tray, be sure to wait until each booklet has been completely
delivered to the tray. If you touch the booklet while it is still being delivered, the sensor may fail to
detect the delivery, causing an error.
• When taking booklets from the output tray, take care not to slide the booklets to the right (toward
the paper exit). Doing so may bring the cut ends into contact with the output tray belt, causing the
paper to curl.
• Take booklets as from the trimmer in the following manner:
1. Put your hands under the booklets and align their left corners.
2. Raise the aligned booklets to remove from the tray.
1. Getting Started
40
To Next Page
Loading...
Need help?
General
