• You cannot perfect bind a booklet if the thickness of the book block's spine exceeds 23 mm (0.9
inches).
• Depending on your machine, the procedure for selecting the orientation of covers and originals
might be slightly different. For details, refer to the procedure for your machine.
• When loading thick paper of 251.0 g/m
2
(138.8 lb. Index) or heavier in the interposer trays of
the perfect binder, make sure the grain of the paper is perpendicular to the feed direction.
• If you are loading sheets that are likely to stick together (such as sheets of coated paper), be sure
to fan them thoroughly before loading. Fanning them will help prevent jams and allow them to be
fed in one sheet at a time.
• The perfect binding process may scratch glossy paper.
Specifying the Paper Size That Is Not Automatically Detected
Specify the paper size on the control panel when loading paper of a size that cannot be detected
automatically.
1. Press the [Media] hub.
2. Press [Add].
3. Specify the Paper Size in the list and then press [OK].
Loading Paper into the Paper Tray
95
To Next Page
Loading...
Need help?
General
