Rigol DHO924 User Manual

Statistics
Click or tap the Statistic on/o
ff switch to enable or disable the statistical result
display. You can also click or tap
at the lower-right of the measurement item in
the "R
esult" sidebar to expand the label to display all the statistical items. Click or tap
to collapse the label. The figure below shows the displayed results after the
Statistic
of period measurement is enabled.
• Click or tap any measur
ement item in the "Result" sidebar at the right side of the
screen and a window is displayed. Click or tap
Reset Stat. t
o clear the history
statistics data and makes statistics again. You can also click or tap
Reset Stat. in
the measur
ement setting menu.
• Click or tap the input field of
Count and use the pop-up numeric k
eypad to set
the count value. You can also use the corresponding multipurpose knob to set
the value. Its range is from 2 to 100000. Its default value is 1000.
10.2.4 Remove the Measurement Results
This oscilloscope allows you to delete the measurement results of the parameters.
• In Measure setting menu, click or tap Remove
to delete the currently selected
measurement item that you've added; click or tap
Remove All
to delete all the
displayed measurement items.
• Click or tap any measurement item in the "Result" sidebar at the right side of the
screen and a window is displayed. Click or tap
Remove t
o delete the currently
Measurements
DHO900 User Guide
146
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30

Rigol DHO924 Specifications

General

Brand	Rigol
Model	DHO924
Category	Test Equipment
Language	English