Rigol DHO924 User Manual

RIGOL be liable for any consequential, indirect, ensuing, or special damages for any
breach of warranty in any case.
27.3 Appendix C: Factory Settings
Press the front-panel or click/tap Default on the Toolbar and a prompt
message "Restore default settings?" is displayed. Click or tap OK to restore the
instrument to its factory default settings, as shown in the table below.
Table 27.2 Factory Settings
Parameter Factory Settings
Horizontal
Horizontal Time Base 2 μs
Horizontal Position 0 s
Delayed Sweep OFF
Roll Auto
Fine OFF
Horizontal Expansion Center
Acquisition
Acquisition Mode Normal
Memory Depth 10 kpts
Vertical
CH1 On/Off ON
CH2 On/Off OFF
CH3 On/Off OFF
CH4 On/Off OFF
Impedance 1 MΩ
Fine OFF
Vertical Scale 50 mV
Vertical Offset 0 V
Channel Unit [V]
Channel Coupling DC
Bias 0 V
BW Limit OFF
Channel Delay 0 s
Display Label OFF
Invert OFF
Attenuation 1X
Appendix
DHO900 User Guide
262
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30

Rigol DHO924 Specifications

General

Brand	Rigol
Model	DHO924
Category	Test Equipment
Language	English