To Next Page

To Previous Page

Figure 23.2 Waveform Saving Setting Menu

Set the source of the waveform data and the format of the saved waveform

• Data source

Click or tap the drop-down button of Data Source to select "Screen" or

"Memory".

• Waveform format

Click or tap the drop-down button of

Format to select the format of the saved

waveform. When the data source is set to "Screen", the format can be set to

"*.bin" or "*.csv"; when the data source is set to "Memory", the format can be

set to "*.bin", "*.csv", or "*.wfm".

Set the file saving parameters

• Set the filename

Click or tap the input field of

File Name to input the file name to be saved with

the pop-up virtual keypad.

• Set the file path

Click or tap the input field of

File Path, then the disk management interface is

displayed. Select the target directory and then click or tap OK to set the file path.

For detailed operations, refer to descriptions in

Disk Management

When a USB device is not connected, the default file path is the "Local Disk";

when a USB device is detected, the path is automatically set to "D:".

Store and Load

237

Rigol DHO924 User Manual

Other manuals for Rigol DHO924