Rigol DS1000Z Series User Manual

Chapter 13 Store and Recall RIGOL
DS1000Z User’s Guide
13-9
To Create a New File or Folder
This operation of folder is only valid in external storage. Before using external disk,
make sure that the USB storage device is connected correctly.
First, press Storage  Disk.Manage and use to select and open the external
disk (“Disk D”). Then, select the desired file type. Last, select the desired directory
under which to create a new file or folder. The default is the root directory of the USB
storage device.
Then, press New File or New Folder to turn on the interface as shown in the figure
below.
This oscilloscope supports Chinese/English input method. The file name or folder
name can contain letters, numbers, underscores, spaces and Chinese characters and
the length of the characters is limited to 64 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the name input, use the menu softkeys to select different operation areas,
then turn
to select the desired content and press down to input the content
selected.

Rigol DS1000Z Series Specifications

General

Brand	Rigol
Model	DS1000Z Series
Category	Test Equipment
Language	English